IKASEAL® Durapruf
IKASEAL® Durapruf is a liquid form waterproof coating made with viscous solvent which does not contain water, does not smell, non-toxic, and is not flammable.
IKASEAL® Durapruf is specially formulated as a high-performance waterproofing to address
stubborn leaks.
IKASEAL® Durapruf is a high performance waterproofing product because it is highly resistant to extreme UV exposure and therefore has a 10 year guarantee against cracking and due to UV exposure in tropical countries like Indonesia, within which time IKASEAL® Durapruf will remain flexible and elastic.
Download Brochure IKASEAL® Durapruf
For more insightful about leaking issue, enter IKASEAL® Durapruf Site
Detail
• Silicone Durability, Cured silicone rubber exhibits excellent long-term resistance to natural weathering including: extreme temperatures, ultraviolet radiation, rain and snow.
• VOC Compliant, High solids solvent-free formulation and low Volatile Organic Compounds content is well below the current limits of established standards, such as
California’s relevant Air Quality Management Districts.
• Ease of Use, Can be applied with common airless spray equipment, roller or brush.
• Versatile Application, IKASEAL® Durapruf silicone roof coating is a single component material that requires no mixing of separate components and can be applied by spray,
roller or brush.
• High Build Formulation, Allows for single coat application and hangs on peaks without sagging.
• Storage & Shelf Life, IKASEAL® Durapruf has shelf life of 18 months from date of manufacture when properly stored in areas protected from sunlight at 27 oC or below.
IKASEAL® Durapruf will not freeze when stored in unheated area during winter months.
Tech Spec
Basic Uses
For structurally sound roofing applications including over existing coatings, single ply, modified bitumen and BUR, foam, metal and other horizontal and vertical roofing.
Perform an adhesion test on each surface type to ensure adhesion.
For structurally sound roofing applications including over existing coatings, single ply, modified bitumen and BUR, foam, metal and other horizontal and vertical roofing.
Perform an adhesion test on each surface type to ensure adhesion.
